BR 800 P Precious Metals, Gems & Water Detection System

BR 800 P Box contents

• The display screen color LCD shows all the GPS data and results U.S. processors.
• Provider control panel screen is convenient and practical.
• Vibratory Frequency Detector partial 400 MHz, which allows you to get very accurate results.
• Technique to measure the depth of goals gives additional major advantage of this device compared with other systems.
• As can be within a very short time survey a large area for the detection of gold and other minerals, groundwater and wells.
• Fixed internal battery rechargeable 9.6 volt strongly.
• In addition to batteries Fund Charger index provider for charging.
• Made In USA.
• Warranty Two years.

1- ADVANCED 3D SCAN

• This system, developed exclusively by BR Systems, works on a new technology to probe and measure the electrical resistance of the soil (SRT) to determine and discover the places of groundwater. This system has been completely modernized so that it can detect water very accurately with the results shown on the screen and immediately, while showing the type, abundance and depth of the detected water. The discovered location with instant and automatic storage of the detected scans within the device’s memory.
• Maximum search depth: 1200 meters below the surface.
• Distinguishing between the types of detected water: This system automatically shows the quality of the detected water after completing the search process and it appears on the screen (fresh water – mineral water – salt water – highly salinity)
• 3D drawing of the target: This system shows an illustration of the target in three dimensions, and the image of the detected target can be moved in several directions to check its size.
• This device is provided with an external application installed on a tablet computer, through which we can view the search results in full, in addition to a 3D drawing of the targets and store them directly, and the connection between the tablet and the device is done through the Wi-Fi network (called BR 950 Professional -Password: brsystems) of the device automatically. (Without the need for the Internet), we open the application and review the results.
• Determining the water force automatically on the screen via a special indicator and at a percentage % rate.
• Show digital indicators interacting with all detected signals
• Permanently display interactive audio indicators when running and at the start and end of the search, with the ability to adjust and change them.
• Show the percentage of water salinity discovered through the newly developed PPM scientific analysis technique.
• Determining the depth of the water detected on the screen, and the depth appears automatically on the display screen immediately after completing the search process.
• Changing the frequency of the HZ signal, and this feature allows giving a higher detection efficiency and strength in hard and dry land when the signal is increased, and it can be raised from 30 HZ to 150 HZ.
• Choosing the type of soil to be detected before starting the search.
• Sensitivity adjustment: the sensitivity of the transmitted signal can be raised to increase the electrical signal transmission in the soil, through special values that appear on the screen, which can be increased or decreased according to the need for the density of the water to be detected.
• Determining the distance between the search poles automatically (from 5 m to 50 m), which is a new feature in the world of geophysical devices for water detection, as the distance between the search poles can be determined through the device program before starting the search process to fully correspond with the distance actually used on the ground. This feature ensures that the results are more accurate than the traditional method.

2- Geophysical search system (Quick Scan)

• This system works through the SRT technology developed by BR Systems, which works on probing and measuring the electrical resistances of the soil to locate and discover the places of water underground.
• The Quick Scan system is characterized by a quick search and scan within a narrow area by planting only two poles in the soil without the need for 4 poles.
• After connecting 2 of the electrodes in the soil, we choose the search line compatible with these electrodes, for example, the search line A, which is compatible with pole 1 and 2, where the device will scan only within this line and show the result on the screen and this feature can be used when needed To make a quick scans in a narrow place, or after using the automatic search system, to limit the location of water within 1 m2.
• Distinguishing between the types of detected water, this system automatically shows the type of the detected water after completing the search process and it appears on the screen (fresh water – mineral water – salt water – highly salinity)
• Maximum search depth: 1200 meters below the surface.
• Determining the water pushing force automatically on the screen via a special indicator and at a percentage rate %.
• Show digital indicators interacting with all detected signals
• Permanently display interactive audio indicators when running and at the start and end of the search, with the ability to adjust and change them.
• Show the percentage of water salinity discovered through the newly developed PPM scientific analysis technique.
• Determining the depth of the water detected on the screen and it appears automatically on the display screen after completing the search process.

3- Geophysical search system (automatic search)

• The automatic search system in this device has been developed and integrated with modern software and techniques to complete the detection process at high speed and provide detailed automatic results on the screen for the locations of water, its density, depths and salinity.
• Through this system, we can conduct a comprehensive search for a specific area by connecting 4 electrodes in the soil and connecting them with the device through special connection cables.
• This system shows the search results directly on the screen after the completion of the scans process and gives a detailed report on the place that was scans and shows the locations of water with accurate identification and limitation of the target within 1 m2.
• The scanning process in this system is through 6 different scanning lines A – B – C – D – E – F
• Distinguishing between the types of detected water, this system automatically shows the type of the detected water after completing the search process and it appears in written form on the screen (fresh water – mineral water – salty water – highly saline)
• Maximum search depth: 1200 meters below the surface.
• Determining the water force automatically on the screen via a special indicator and at the rate %
• Show digital indicators interacting with all detected signals
• Show interactive audio indicators permanently when running and when searching starts and ends with the ability to adjust and change them.
• Show the percentage of water salinity discovered through the newly developed PPM scientific analysis technique.
• Determining the depth of the water detected on the screen and it appears automatically on the display screen after completing the search process.

4- Long Range Locator (LRL) system:

The horizontal sensing technology (LRL) in the BR 950 Professional is based on scientific foundations and modern technologies that were recently developed and designed by BR Systems, as it is characterized by accuracy and high efficiency in detecting potential targets in the surrounding area in a short time. Through this system, you can choose the type of water to be detected (fresh water – mineral water – salt water – all types of water) and the device will automatically start directing you towards the strongest water points in the area until it connects you to the target center in rapidly.

This system is characterized by the speed of tracking targets from long distances of up to 2000 m circular, and this is done with high detection accuracy and correct orientation, and it can work in all types of different terrain and on all types of soil, whether arid or wet.

BRF technology New signal filter technique:

This system is equipped with a new technology to filter the transmitted and received signals BRF to maintain a precise and pure signal away from any interference caused by ground radiation emanating from the rocks and the natural mineral interference in the soil. Determining the real targets in the area with great accuracy and staying away from any mineralization or radiation present in it, and this also enables the use of this system in all rugged areas and different terrain at all times.

LRL System Features:

• The possibility of determining the quality of the water to be detected before starting the search and restricting other types of water.
• The depth of this system reaches 950 m underground with the ability to determine the maximum depth to be reached.
• The maximum search range is 2000 circular meters with the ability to select on several levels.
• This system is supported by B.U.M . automatic monitoring technology.
• The system supports radar signals on the screen that show that the system is in use and running.
• The system supports audio technology accompanying the radar signals on the screen.
• The laser guidance technology G.L.Y to the system, which in turn shows the user the direction of the target and guides it until reaching the target center.
• The possibility of changing the frequency from -25 Hz to + 25 Hz and this technology is more useful for users who have worked on the device for a longer period.
• List of targets detected by the system: fresh water – mineral water – salt water – all types of water at one time.
• The possibility of controlling the change of the required maximum depth from 25 m up to 950 m based on the user’s desire.
• The possibility of controlling the change of the front range of the detection from 100 m up to 2000 m circular based on the user’s desire.

Technical specifications of geophysical detection systems

Technical Specifications of LRL Detection System

Geophysical System Fetures

LRL Features

The geophysical system portfolio includes

LRL System Bag includes

Are you not from the USA? Do you want to place an order and are afraid of not knowing if you will have to pay taxes, VAT and other charges when the package enters your country.
Do you want to know the final price for receiving the package at your door? Contact us now and you will receive a quote including all taxes and payments for the package to arrive in your hands.
Click here - and get the an instant QUOTE with a click

HOW MUCH DOES SHIPPING COST?

We offer shipping to most countries of the world.
The shipping cost depends on the destination country, product price and promotions. Therefore there is no predetermined price. We make every effort to provide you with metal detectors at the best shipping prices in the market. We usually ship with DHL / FEDEX / USPS / UPS and more.
You can read more about our shipping policy on the shipping page.

DO YOU PROVIDE A WARRANTY?

All our products come with warranty and original manufacturer certificates. In addition, we provide service and warranty for all products sold by us. You can always verify the authenticity of a device before making a purchase directly on the designated manufacturer's website. Our representatives are at your service on this matter. You can read in detail about the product warranty.

HOW DO I CHOOSE THE RIGHT METAL DETECTOR FOR ME?

Choosing the most suitable product for you is a suitable task for our professionals. We are available for you. Contact us and one of our representatives will be happy to help and advise you on the matter. There is no doubt that you must plan your purchase in advance and prepare for the range of the amount of money you are willing to invest, the type of detector technology according to your search area and other variables.

Continue to the frequently asked questions page and you can get answers that will help you choose and make your next purchase safely and responsibly.