GEOSENSIS X3 - 3D Ground Radar

GEOSENSIS X3 HIGHLIGHTS

• GEOSENSIS X3 KIT version utilizes a 4 meter circumference cable coil as standard equipment that can be mounted to a large frame 1 x 1 meter size, for the purpose to locate larger metal objects at greater depths compared to the capabilities of small round coil VLF detectors.
• With the big coils larger areas can be covered in less time. The coil is mounted into a lightweight frame (pvc tubes). The frame can be ordered or constructed easily. During searching 2 users are required, one to carry the frame coil and another to control the main unit.
• The supplied cable coils are not part of a critically balanced circuit as with VLF detectors, therefore they can be formed into any shape or large size, to increase depth considerably.
• A compensated (crossed, like the shape of “8”) coil cable can be formed by the user, to eliminate electromagnetic interference signals.
• There is a time delay into the coil between the phases of the pulse transmit and signal receive, that permits the detector to operate with higher transmit power.
• Small metal objects, like scrap bottle caps, pull tabs, aluminum foil, single coins are ignored when the large coils are used.
• GEOSENSIS X3 remains a very easy to use metal detector with only 4 simple control knobs, from these only RESET is required frequently during searching to cancel ground signal.
• SUPER PROBE pinpointer comes with GEOSENSIS X3 KIT standard equipment, the probe operates in cracks, voids, hollow spaces, wells or for a more accurate pinpointing with metal discrimination.
• Frame coil 2 x 2 m. covers 4 times the area of the standard frame, offers 30-40% increase on depth penetration for large objects and less sensitivity to small targets.
• Available coil options are SUPER PROBE 4 cm diameter x 20 cm long, round coils diameter 36 & 45 cm, cable coils that can be mounted into square or round frame coils 1 x 1 , 1,5 x 1,5 m., 2 x 2 m., all waterproof and submersible under water.
• Ferrous / Non Ferrous metal discrimination for objects larger than 10 x 10 cm (with cable coil).
• Operation is simplified as the internal reset adjustments are made automatically with power on.
• Reset to the changes of ground mineral conditions requires only to press RESET.
• Targets are indicated by a backlighted signal meter and VCO audio that increases in frequency as the coil approaches over the target.
• VCO audio has a very wide range so that the frequency is still increasing progressively even with the coil positioned very near the target spot as an aid for accurate pinpointing.
• Compatible with the ICON DATA logger for real time target imaging in 2D / 3D graphics.

GEOSENSIS X3 SPECIFICATIONS

ELECTRICAL DATA

*In case the detector is exposed to low temperatures, changing the environment to sudden warming has to be avoided. The moisture created will be the cause for function misbehavior.

DIMENSIONS

WEIGHTS

DETECTION DEPTHS

* Ranges recorded with an increase of audio ticks for reference purposes. Depths increase even more with larger metal object surface or when using larger search frame sizes. Variations may be noticed due to ground minerals, detector tuning and metal object conductivity.